FAQ

1) There are so many stoves, fireplaces and inserts to choose from, which one should I choose?

Answer

First Decision

Your first decision in determining which type of system best fits your needs should be the type of fuel you would like to use: gas, wood, or pellets.

Wood is traditionally used for supplementary heating. We offer woodstoves and inserts that will produce warm, lasting heat. The large viewing glass allows a clear view of glowing coals and flickering flames.

The advantages of burning wood are:

  • Independent from utilities in the event of power outages
  • Efficient and inexpensive
  • Helps protect winter air quality due to low particulate emissions
  • Impact on global warming is reduced since firewood is carbon neutral and all wood stoves must meet strict EPA guidelines

Gas is a convenient, labor-free fuel. You only need to set a thermostat or press a button and your fire is started instantly. Break-throughs in burner technology now provide fires that are realistic enough to fool experts.

The advantages of burning gas are:

  • Abundant and widely available
  • Economical means of heating
  • Propane (LP) gas is ideal for rural homes
  • Not limited by natural gas service areas
  • Will operate during power outages

Pellets are made of compressed wood waste are another popular fuel. Pellet fuel is sold in bags and can be purchased at most hardware stores, feed stores, lumber yards, large grocery stores as well as hearth products stores. The fuel is stored in a hopper inside the appliance and metered by automatic controls into a small cup in the stove called a burn pot where air is forced through the burning pellets, producing a hot, almost smokeless fire.

The advantages of burning pellets are:

  • Pellet appliances are self igniting
  • Fuel is widely available and easy to purchase
  • Can operate from a thermostat
  • Almost smokeless fire

Second Decision

The second decision you must make is what type of system to purchase: a freestanding stove, a fireplace insert or a fireplace. We offer freestanding stoves that burn wood, gas or pellets, fireplace inserts that burn wood, gas or pellets and fireplaces that burn wood or gas.

Freestanding Stoves can be positioned in a variety of places within the home. Freestanding stoves are normally vented straight up using a manufactured steel chimney pipe. Freestanding stoves can also have an elbow to direct the chimney horizontally through a wall or into a masonry chimney. A freestanding stove can also sit on the hearth of a masonry fireplace and be vented up the chimney. Freestanding wood stoves require a hearth pad for floor protection.

The advantages of freestanding stoves are:

  • Radiating heat from all sides
  • Natural and fan assisted convection
  • Placement versatility in the home

Fireplace Inserts are an easy means of converting an existing, inefficient, steel or masonry open fireplace into an attractive, efficient heat source. Flexible pipe directs the flue gasses up the existing chimney.

The advantages of fireplace inserts are:

  • Heat recovery in the form of radiant heat
  • Impressive natural and fan assisted convection
  • Uses minimal space
  • Can use your already existing structure

Fireplaces are always a focal point in a room. Our fireplaces come in many styles and decorative faces. Our gas fireplaces are efficient heaters that will continue to operate even if the electricity goes out. Installing a fireplace requires more planning due to the construction necessary to enclose the fireplace and chimney.

Although some planning and thought are required to select the right fuel and type of system for your home, you can be sure that The Village Fireplace and Stove Center will supply you with a quality heating system that will grace your home for years to come.

2) I would love to have a wood stove in my home, but I don’t have a chimney. Can I still have a wood stove installed?

Answer

Yes, you can still have a wood stove! We offer Pre-Fab Chimneys that we will install in your home. Before you know it you will be on your way to a true-heating pleasure with your new wood stove. Contact us for a free estimate!

3) Do you offer free estimates?

Answer

Yes we do offer free estimates. Contact us by phone at 717-846-9417, email, or stop into the showroom to get started.

4) What types of payments do you accept?

Answer

We accept cash, checks, and all major credit cards.

5) What is the difference between a gas fireplace, gas insert, and a set of gas logs?

Answer

Gas logs are a stack of ceramic logs that sit inside your existing fireplace. Gas logs have a gas burner and they come in vent-free and vented options. Vented gas logs vent up your existing chimney. Vented gas logs are usually more for looks and aesthetics than for warmth. While they will emit some heat, they do not discharge as much heat as a built-in gas fireplace or gas insert.

A gas insert will sit inside your existing fireplace. Inserts produce a lot of radiant heat and warm air. Like gas logs and gas fireplaces, gas inserts come in vented and vent-free models. There are many options to choose from with the models that we carry, including the media (logs, rocks, glass) and front (door or window frame style front), as well as the finish of the front.

A gas fireplace is similar to a gas insert. However, the difference between gas fireplaces and gas inserts is that a built-in gas fireplace doesn’t require an existing fireplace or chimney. Similar to gas inserts and gas logs, gas fireplaces come in vented and vent-free models. Vented gas fireplaces exhaust the air through an exterior opening in your wall.

6) What is the difference between a vented gas product and a vent-free gas product?

Answer

Vented gas products require a fully functional wood burning fireplace and must be burned with the damper open or be vented to the outside of your home.

Vent-Free (also called Unvented or Ventless) gas products can be installed in either a wood burning fireplace, or a ventless fireplace that is rated for aftermarket ventless logs and are burned with the damper closed.

7) Do you carry vented or vent-free products?

Answer

We only carry vented gas products.

8) I want to convert my wood fireplace to a gas fireplace. Where do I start?

Answer

The first choice you have to decide is do you want a gas log set or a gas insert. After that decision is made, we encourage you to stop into our showroom to see the products we have to offer.

We have many working displays and someone on our team would be happy to help you in this decision. We then come to your home for a site inspection of the chimney and discuss if any further action would need to be taken or draw up an estimate for installation.

9) I want to convert my gas log fireplace to a wood burning fireplace. Where do I start?

Answer

When switching from gas to wood, it will require a level 2 inspection. This inspection will let you know the condition of your chimney and if any further action is needed before removing the gas logs and capping off the gas line. Our company offers this service by appointment.