The Tribute is designed to satisfy the customer who loves the style of our Heritage woodstove but doesnâ€™t need as much heat. For a warm welcome, and taking the chill off your large room, or smaller home, the Tribute does it with style and efficiency. When fully loaded, the Tribute will burn for up to 7 hours. The Tribute has a 1.2 cubic foot firebox and is rated at 36,000 BTUs. Using the full 1Â¼â€ thick soapstone, it has a HeatLifeâ„¢ rating of 9 hours. In addition, the Tribute warms your home with minimal fire tending required.
1.2 cubic foot firebox
Holds up to 20 lbs. of wood. The Tributeâ€™s deep firebox and easy loading door allow use of logs up to 16″ in length.
Single air-intake lever/stove control
Stove operation is easy; performance more consistent.
Unmatched fire viewing
Air entering the firebox through the stoveâ€™s secondary air tubes ignites the gases rising off the burning wood. The resulting light and flames provide dazzling fire viewing, even when the fire is burning at a low rate.
Outside air adapter (optional)
Improved efficiency in todayâ€™s newer “airtight” homes; reduces cold air drafts along the floor.
Rear heat shield (optional)
Allows more placement options; stove can be installed closer to a wall because clearance requirements are reduced; creates a convection passageway between shield and back of stove to allow fan to circulate air through house.
Fan with built-in thermostat and rheostat (optional)
Helps spread heat evenly throughout home; fan operates only when stove is at significant heat level. The rheostat controls fan speed. Use of rear heat shield is required.
Allows for open door fire viewing.
|Heats up to||1,000 sq. ft.|
|Burn Time||Up to 5 hours|
|Heat Life||Up to 7 hours|
|EPA Rating||2.9 grams per hour|
|Height (includes flue collar)||25-3/4″|
|Maximum Log Length||16″|
|Firebox Capacity||1.2 cubic feet|
|Flue Exit & Diameter||6″ top exit only|
|Optional Blower Kit||Yes|
|Actual Weight (lbs.)||313|
|Mobile Home Certified||Yes|
Clearances (With single wall pipe & no rear heat shield)
Clearances (With double-wall pipe & rear heat shield)
|Minimum Size (US)||29″ W x 31-1/8″ D|
|Minimum Size (Canada)||97 cm x 107 cm|